HOPE RX24 700C PRO 5 Straight-Pull Front Wheel 12x110mm Boost 24 Spokes Orange

Hope recommends 32 to 50 mm tyres for the RX24, with a tolerance of up to 60 mm for very wide setups. Its 24 mm internal width offers the best compromise with tyres around 38 to 45 mm, the most common range for versatile gravel riding.

Note: Hope’s PDF specifications give a slightly different range (30 to 64 mm) from its product page. If fitting a tyre at either end of the range, it is best to check with the tyre manufacturer.

More spokes make a wheel stronger and better able to carry loads, at the cost of a few dozen grams and a little extra drag. A 24-spoke wheel suits fast gravel riding and lighter to average-weight riders; 28 spokes is the versatile default; 32 spokes suits loaded bikepacking, heavier riders and rough terrain.

The maximum system weight remains 130 kg regardless of spoke count, including bike and luggage.

The difference is the shape of the spoke where it enters the hub. A J-Bend, also called Standard, is a conventional spoke with a bent head: it is widely available from repair shops, making repairs easier when travelling. A Straight-Pull spoke has no bend: this eliminates the area where most breaks start and helps it maintain tension over time.

The two versions are not interchangeable: they use different hubs. For bikepacking far from repair facilities, J-Bend remains easiest to repair; for performance and long-term spoke durability, Straight-Pull has the advantage.

This refers to how the brake rotor attaches to the hub, and it must match your rotors. A 6-bolt rotor attaches with six Torx bolts; a Centerlock rotor fits using a cassette lockring tool, making installation quicker and lighter. The RX24 is available in both versions; select the one you need from the variants.

If you’re unsure, check your current rotors: six bolts around the hub mean 6-bolt; a central splined lockring means Centerlock. Centerlock-to-6-bolt adapters are available, but not the reverse.

Yes. The rim comes from the factory already taped, and a Hope Presta valve matching the hub colour is supplied with the wheel. All that remains is to fit the tyre and add sealant, which is not included.

Allow around 60 ml of sealant for a 40 to 45 mm gravel tyre, and use a high-volume air source (a compressor or reservoir pump) to seat the beads on the first fitting.

The Pro 5 succeeded the Pro 4 in Hope’s range. It has a 54-tooth freehub with six offset pawls, giving 108 engagement points and 3.33° between engagements, compared with 44 engagement points on the Pro 4. In practice, pedalling picks up much more quickly, which you can feel when accelerating on trails or putting the power down after a technical section.

The RX24 is a low-profile (23 mm) aluminium wheel designed for versatile gravel riding and bikepacking: robust, repairable, available with 24, 28 or 32 spokes, and considerably more affordable. The RX40 is a 40 mm-deep carbon wheel that is lighter and more aerodynamic, aimed at fast gravel riding and racing.

For carrying luggage, rough trails or a tighter budget, choose the RX24. For speed on smoother routes, choose the RX40. Both feature the same Pro 5 hub and the same quality of British manufacturing.

This wheel is sold individually. To make a pair, match it with the HOPE RX24 700C PRO 5 rear wheel in the same colour, with the same spoke count and spoke type (Standard or Straight-Pull), choosing the axle spacing and freehub body to suit your bike.

Selling the wheels separately also means you can replace just one if it breaks.